| Spring Loaded LVDTs - General Purpose |
 |
GHSA/GHSAR 750 Series - GHSA/GHSAR 3/4 inch (19 mm) diameter AC-operated LVDTs are designed for a wide range of position measurement applications. These rugged, hermetically sealed sensors are constructed entirely of stainless steel, have either an axial or radial connector, and are intended for general industrial use.
- Ranges of ±0.05" to ±2" [±1.25 mm to ±50 mm]
- Repeatability of 0.000025" [0.60 µm] or better
- Also available in air extend/spring retract versions (GHSAR-A)
|
GHSA 750
GHSAR 750
GHSAR 750-A
|
 |
GHSD/GHSDR 750 Series - GHSD/GHSDR 3/4 inch (19 mm) diameter LVDTs utilize built-in electronics that convert a ±15 V DC input into a precalibrated 0 to ±10V DC output. Like the GHSA/GHSAR AC versions, they are available in seven standard ranges from ±0.020" [±0.51 mm] to ±2.00" [±50 mm] and include either axial or radial connectors.
- Precalibrated ranges of ±0.02" to ±2.00" [±0.51 mm to ±50 mm]
- Repeatability of 0.000025" [0.60 µm] or better
- Also available in air extend/spring retract versions (GHSDR-A)
|
GHSD 750
GHSDR 750
GHSDR 750-A
|
 |
GHSE/GHSER 750 Series - GHSE/GHSER 3/4 inch (19 mm) diameter LVDTs offer all the advantages of our other general purpose spring loaded LVDTs, but are powered by a nominal 24 V DC input and are available in six standard precalibrated ranges from 0.100" [2.5 mm] to 4.00" [100 mm] with an output from 0-10V DC.
- Precalibrated ranges of 0.10" to 4.00" [2.5 mm to 100 mm]
- Repeatability of 0.000025" [0.60 µm] or better
- Also available in air extend/spring retract versions (GHSER-A)
|
GHSE 750
GHSER 750
GHSER 750-A
|
 |
GHSI/GHSIR 750 Series - GHSI/GHSIR 3/4 inch (19 mm) diameter LVDTs offer all the advantages of our other general purpose spring loaded LVDTs, along with the convenience and simplicity of precalibrated 4-20 mA current loop operation. Units operate as 2-wire loop powered or 3-wire sourcing externally powered.
- Precalibrated ranges of 0.10" to 4.00" [2.5 mm to 100 mm]
- Repeatability of 0.0001" [2.50 µm] or better
- Also available in air extend/spring retract versions (GHSIR-A)
|
GHSI 750
GHSIR 750
GHSIR 750-A |
| Spring Loaded LVDTs - Ultrahigh Precision Gaging Probes |
 |
BB Series - Macro Sensors BB Series LVDT-Based Dimensional Gaging Probes provide ultra-precise measurement of the position of a targeted surface in a wide variety of quality control and industrial metrology applications, including online parts inspection, servo-loop positioning systems, and manufacturing process control.
- Ultra-precise assembly gives repeatability of less than 0.000006" (0.15 μm)
- Ranges from ±0.020” (±0.5 mm) to ±0.200” (±5.0 mm)
- Available in full bridge or half bridge
|
|
| Spring Loaded LVDTs - Short Range Economy |
 |
GSA Series - The GSA 750 series of short range spring loaded position sensors were developed for cost sensitive applications requiring LVDT reliability and performance. Available in ranges of ±0.10 inches to ±0.30 inches, these sensors offer the excellent measurement capabilities of an LVDT at very economical prices.
- Ranges of ±0.100" to ±0.300" [±2.5 mm to ±7.5 mm]
- Non-linearity less than ±0.5% of FRO
- 220°F (105°C) operating temperature
|
GSA 750 |
| Separate Core LVDTs - Miniatur |
 |
CD Series - Macro Sensors’ CD 375 Series of 3/8 inch (9.5 mm) diameter AC-operated LVDTs are small size contactless linear position sensors for both OEM and end user applications. The low mass of their cores makes these miniature LVDTs well suited for high response dynamic measurements.
- Miniature 3/8 inch size, low core mass
- Ranges of ±0.025" to ±1.0" [±0.63 mm to ±25 mm]
- Available in high pressure & high temperature configurations
|
CD 375 |
 |
MD Series - Macro Sensors’ MD 188 Series of 3/16 inch (4.75 mm) diameter AC-operated LVDTs are small size contactless linear position sensors for both OEM and end user applications. The low mass of their cores makes these miniature LVDTs well suited for high response dynamic measurements. (Contact Factory for Information)
- Miniature 3/16 inch size, low core mass
- Ranges of ±0.020" to ±0.100" [±0.50 mm to ±2.5 mm]
- ±0.5% maximum linearity error
|
|
| Separate Core LVDTs - General Purpose |
 |
PR Series - Macro Sensors’ PR 750 Series of 3/4" (19 mm) diameter AC-Operated LVDTs are general purpose contactless linear position sensors for both OEM applications and end user requirements. PR 812 Series AC LVDTs are 0.812" (20.6 mm) diameter versions are designed primarily for use in legacy OEM applications.
- Available in 0.750" or 0.812" diameters
- Ranges of ±0.05" to ±10" [±1.25 mm to ±250 mm]
- Non-linearity less than ±0.25%
|
PR 750
PR 812
PRH 812
|
 |
SE Series - SE 750 Series 3/4 inch (19 mm) DC-operated LVDTs are designed for a wide range of position measurement applications. They use built-in electronics to provide the desirable features of an AC-LVDT, such as frictionless operation and dynamic response, with the simplicity of DC input and precalibrated DC output.
- Ranges from 0.100 inch [2.5 mm] to 20.00 inches [500 mm]
- 24 V DC input, true 0-10 V DC output
- Non-linearity less than or equal to ±0.25% of FSO (±0.10% optional)
|
PR 750
PR 812
PRH 812
|
 |
DC Series - DC 750 Series 3/4 inch (19 mm) DC-operated LVDTs are designed for a wide range of position measurement applications. They use built-in electronics to provide the desirable features of an AC-LVDT, such as frictionless operation and dynamic response, with the simplicity of DC input and precalibrated DC output.
- Ranges from ±0.050 inch [±1.25 mm] to ±10 inches [±250 mm]
- ±15 V DC input, 0 to ±10 V DC output
- Non-linearity less than or equal to ±0.25% of FSO
|
DC 75
SE 75
|
 |
SI Series - SI 750 Series 3/4 inch (19 mm) LVDTs are designed for a wide range of position measurement applications. They use built-in electronics to provide the desirable features of an AC-LVDT, such as frictionless operation and dynamic response, with the simplicity of a precalibrated 4-20 mA current loop operation.
- Ranges of 1 inch [25 mm] to 20 inches [500 mm]
- 4-20 mA current loop operation
- Non-linearity of ±0.25% of FRO or better
|
SI 750 |
| Separate Core LVDTs - Hermetically Sealed |
 |
HSA/HSAR 750 Series - HSA/HSAR 750 Series 3/4 inch (19 mm) diameter AC-operated LVDTs are designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors that are constructed entirely of stainless steel. Electrical termination is through a sealed axial or radial connector.
- Ranges of ±0.05" to ±10" [±1.25 mm to ±250 mm]
- ±0.25% maximum linearity error
- In-line design; mating plug for connector included
|
HSA 750
HSAR 750
|
 |
HSD/HSDR 750 Series - HSD/HSDR 750 Series of 3/4 inch (19 mm) diameter DC-LVDTs use built-in electronics to provide the advantages of an LVDT, such as frictionless operation and dynamic response, with the convenience of DC input and precalibrated DC output. Electrical termination is through a hermetically sealed axial or radial connector.
- Ranges of ±0.015" to ±10" [±0.38 mm to ±250 mm]
- ±15 V DC input, precalibrated 0 to ±10 V DC output
- Non-linearity less than ±0.25% of FRO
|
HSD 750
HSDR 750
|
 |
HSE/HSER 750 Series - HSE/HSER 3/4 inch (19 mm) diameter LVDTs offer all the advantages of our hermetically sealed separate core LVDTs, but are powered by a nominal 24 V DC input and are available in standard precalibrated ranges from 0.100" [2.5 mm] to 20.00" [500 mm] with an output from 0-10V DC. Axial or radial connectors available.
- 24 V DC input, precalibrated 0 to 10 V DC output
- Precalibrated ranges of 0.100" to 20.00" [2.5 mm to 500 mm]
- Non-linearity less than or equal to ±0.25% of FSO (±0.10% optional)
|
HSE 750
HSER 750
|
 |
HSI/HSIR 750 Series - HSI/HSIR 3/4 inch (19 mm) diameter LVDTs offer all the advantages of our hermetically sealed separate core LVDTs, along with the simplicity of precalibrated 4-20 mA current loop operation. Units operate as 2-wire loop powered or 3-wire sourcing externally powered. Axial or radial connectors available.
- 4 to 20 mA input/output
- Ranges of 1.00" to 10.00" [25 mm to 250 mm]
- Non-linearity of ±0.25% of FRO or better (±0.10% optional)
|
HSI 750
HSIR 750
|
| Separate Core LVDTs - Hazardous Locations |
 |
SQ Series - SQ 1250 Series heavy duty LVDTs have their electrical assembly totally encapsulated within a heavy duty aluminum housing, with their electrical connections made to screw-terminal style barrier strips. They meet the IEC IP-64 sealing standard against the intrusion of splashed water and other liquids.
- Ranges of ±0.50 inches to ±10.00 inches [±12.5 mm to ±250 mm]
- Non-linearity less than ±0.25% of FRO
- 300°F (150°C) operating temperature
|
SQ 1250 |
 |
HSTA 750 Series - HSTA 750 Series of 3/4 inch (19 mm) diameter AC-operated LVDTs are designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for use at high temperatures (400°F). Termination is through a sealed axial connector.
- Ranges of ±0.05" to ±10" [±1.25 mm to ±250 mm]
- 400°F (200°C) operating temperature
- Optional capability to withstand exposure to mild radiation (3x107 Rads)
|
HSTA 750
HSTAR 750 |
 |
HSTAR 750 Series - HSTAR 750 Series of 3/4 inch (19 mm) diameter AC-operated LVDTs are designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for use at high temperatures (400°F). Termination is through a sealed radial connector.
- Ranges of ±0.05" to ±10" [±1.25 mm to ±250 mm]
- 400°F (200°C) operating temperature
- Optional capability to withstand exposure to mild radiation (3x107 Rads)
|
HSTA 750
HSTAR 750
|
 |
HLR 750 Series - HLR 750 Series 3/4 inch (19 mm) diameter hermetically sealed AC-LVDTs are listed for [Class 1, Division 1, Groups A, B, C, D and Class 1, Zone 2, Group IIC Hazardous Locations] -or- [Class 1, Division 2, Groups A, B, C, D and Class 1, Zone 2, Group IIC Hazardous Locations] by Underwriters Laboratories.
- ATEX & UL/ULc Listed
- 212°F (100°C) Temp for Class 1, Div 1; 300°F (150°C) for Class 1, Div 2
- Ranges of ±1.00 inches to ±10.00 inches [±25 mm to ±250 mm]
|
HLR 750
Installation Standard Barrier
Barrier Recommendation: Peppen & Fuchs Zener Z961 |
| Rotary Position Sensors - High Accuracy |
 |
RSE 1500 Series - RSE 1500 series sensors provide an analog voltage output proportional to shaft rotation over a total range of 120°. They utilize built-in electronics offering DC input/output configurations and are available for 0° to 30°, 60°, 90°, or 120° rotation ranges with a true 0-10 V DC unipolar output.
- Full 360° rotation contactless technology
- True 0-10 V DC unipolar output
- Non-linearity less than ±0.1% of FRO
|
RSE 1500
|
